Ask Experts Questions for FREE Help !
Ask
    dharm12's Avatar
    dharm12 Posts: 2, Reputation: 1
    New Member
     
    #1

    Oct 10, 2011, 05:31 AM
    Problem thermostat
    I change the temperature settings overnite, however when I woke up at night the thermostat read "following schedule recovery" and the system was set to the old temperature. What is going on?

Check out some similar questions!

Thermostat problem or ? [ 0 Answers ]

Have a upflow carrier gas furrnace 58AFG and upm thermostat. When thermostat clicks on there is a loud clunk... same clunk when thermostat clicks off. Not sure if it is the duct because fan continues to run after thermostat clicks off. (and there is no further clunking or pinging coming from ducts...

Thermostat problem [ 0 Answers ]

I recently bought a house with no thermostat only 4 wires coming out of the wall. I bought a thermostat for it but the markings on it don't match the ones on the Furnace. The thermostat markings say y1,w/b,y/o, rh, rc, and g. I opened the Furnace and there are 7 wires going into a box which I...

Could my problem be the thermostat [ 3 Answers ]

Hello, I'm quite new here and never had to deal with US A/C systems and thermostat. I was wondering if my thermostat was working as it should and I was desperately looking for information on any Janitrol thermostat like mine. Actually, what Moronix said is exactly what happens here. Like...

AC Thermostat Problem [ 1 Answers ]

Greetings: I'm from Canada and last fall installed a NOMA 7 day programmable Thermostat to replace our old mercury switch thermostat. The heat default was set at 5 cycle times per hour which worked great, but now that I've switched over to AC, I'm finding it can't cool it down quick enough, and...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.