Ask Experts Questions for FREE Help !
Ask
    mark1950's Avatar
    mark1950 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 7, 2011, 07:51 AM
    Simplicity 4212 hydrostatic?
    How does hydrostatic transmission work?
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Oct 7, 2011, 04:08 PM
    Internal hydrulic pressure
    Inter operation depends on what hydro is in the tractor.
    Charge pump in side creates pressure swash plate determinds which way it goes .forward or reverse .the further it opens it allows more fluid which creates more pressure.
    Hope this helps . Luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Simplicity 4212 Riding Mower Won't Start [ 2 Answers ]

My 1987 Simplicity 4212 Hydrostatic with a Briggs 12hp I/C vertical shaft engine ran fine all last summer. I had it running fine last week and ran it for awhile. When I went to start it today, nothing happened... no click, engine didn't turn, starter didn't engage... nothing! I changed out the...

Where is the battery on my simplicity 4212 mower [ 1 Answers ]

I recently inherited a simplicity 4212 riding lawn mower. The ignition clicks but won't start. I want to charge the battery but I don't see where it is located.

4212-30 chrysler furnace comes on but does not turn fan on. [ 2 Answers ]

How do I fix this problem? My furnace comes on but does not blow air.

Simplicity won't start [ 3 Answers ]

2001 Simplicity Regeant mower. Will not start. Changed battery to brand new one, started right up. Turned off after mowing and the next mow, would not start. Need to jump it every time to start it. Starts right away when jumping it. What could the problem be? Thanks for any imput. Jason

View more questions Search