Ask Experts Questions for FREE Help !
Ask
    Kevin_Farmer.'s Avatar
    Kevin_Farmer. Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 5, 2011, 03:08 PM
    How do I connect my on/off switch to the fan/light and power?
    I have an existing switch on/off on wall with a ground, black and white coming out by my new ceiling fan/light. By the new ceiling fan there is power a Ground, black and white. On the fan/light there are green, black and white wires for light and green, black and white wires for the fan motor. How do I wire the power and switch to all that?
    jerro's Avatar
    jerro Posts: 172, Reputation: 5
    Junior Member
    		  
    #2

    Oct 6, 2011, 08:21 PM
    Blacks together,whites together, greens to ground
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I put light in attic now I want to connect it to an existing light switch? [ 6 Answers ]

I have put a 5 foot light in my attic.I have connect 3 core flex(brown /blue/earth) to light and have a plug top on other end.So basically if I need to turn it on I just plug it into a socket in the landing.But I want to connect it to an existing single pole light switch and lose the plug top.how...

Bathroom fan and light, one switch. How to connect ? [ 2 Answers ]

Replacing fan with Nutone Fan-Light 763RLN The original power source is simply a black and white wire, the new fan has 2 white, a black and a blue. Do I simply just connect the whites to white and the Black and Blue to Black ?

Separate Fan light switch, fan switch and switch for can lights to one location [ 2 Answers ]

I have A circuit that has 6 can lights and a fan light. The power is at the switch box I need to know how to wire the separate switches for the cans,and the light on the fan, and fan (That would be in a three gang switch box.) to one location.

Bathroom light is power to switch, I want to add a fan [ 1 Answers ]

We are adding a fan in our powder room but the switch is powered through the light, how do I wire it so that my fan and light can be on their own switches

How do I connect my fan light to the switch? [ 3 Answers ]

I have just installed a Hunter Fan which is a fan/light combo. The switch has two switches one for the fan and one for the light. I have connected the wires properly from the fan to the romex and am ready to connect the switch to the fan/light combo. How do I connect this? The switch has a black, a...

View more questions Search