Ask Experts Questions for FREE Help !
Ask
    uaskme01's Avatar
    uaskme01 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 2, 2011, 04:51 PM
    I am trying to configure a new cisco wpa4410 access point
    I cannot get connected and if I do it drops after a short time. So, I cannot configure the router. Any suggestions?

Check out some similar questions!

Cisco wireless access point 1240ag's ethernet interface stops responding. [ 0 Answers ]

We have 3 cisco 1240ag APs. All 3 are having the same problem. We power cycle the ap and it works for a few days, mostly 2-3 days. Then the ethernet stops responding, The clients can see the ap but they don't get ips and connectivity. Then we have to use the same power cycle. Any cisco guru...

Configure firewall redundancy on cisco 6509 [ 1 Answers ]

Dear all, Good morning/evening, I have catalyst switch 6509, with two firewall service modules(FWSM) Do I need to configure any command on the switch to make the second Firewall module to work as failover for the first firewall module. Thanks for your kind responses.

Is there any in-built or detacheable in cisco access points? [ 1 Answers ]

Is there any in-built or detacheable in cisco access points?

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.