 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Craftsman 2 cycle leave blower manuals?
I was running the 2 cycle blower and it just stopped. It was low on fuel so I replaced, but still not able to start. I changed the spark plug (knowing it was a long shot), and still no luck. In pulling the starting there is no sense that it will start. It is either electrical or it's no getting fuel.
Any suggestions? Fuel filter? Not sure where this is located. Not getting spark? |
||||
Check out some similar questions!
I have a craftsman lawn tractor model 917-2720601 and need instructions on how to repklace the mower clutch cable.
I need to know the correct 2 cycle oil mix ratio for a craftsman 32cc weekwacker trimmer
HELP, I just had the modulator replaced on my furnace and don't know if it is working right. The heat blows through the register for one min. Shuts off for one min. It has been doing this for about an hour to heat the house 3 degrees! That does not seem right to me.:mad:
I accidentally used regular Castrol 2 cycle motor oil (instead of craftsman synthetic) and now the engine is seized. What do I have to do to repair the engine? The manual states to only use synthetic so I assume Sears will not repair this unit as it is only 4 months old.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
