 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore ultra dishwasher starting cycle I did not set it for
I have a Kenmore ultra dishwasher and am trying to set it to run the cycle that I want but the minute I press the normal wash button; it goes to the pots & pans cycle; and starts. I have unplugged it for over 10 minutes, and it still does this? What do I need to do to be able to run the cycle that I want?
|
||||
Check out some similar questions!
I am looking for the guide for a Kenmore Ultra Dishwasher model # 665-15891-791. I just got it used and I know it is probably old, but still need to know how it works and the codes in case it stops. Thank
The dishwasher was working and all of a sudden just shut off in the middle of the cycle. It still has some water towards the bottom of the drain, but I don't see a clog in the line. It is getting power to it and I've tried a few of the reset options I've seen for other models to no avail. Would...
The top spinning arm on my dishwasher is not getting enuf flow to spin the arm and wash the top dishes. I am not sure what to check. Can you help me? Thanks, Lisa
I have a Sears Ultra Dishwasher that just stopped spraying on the wash cycle. Everything seems to work except there's no water spraying through the arms when the wash cycle is active. There is water in the bottom and the drain cycle works fine, too. Does this have an obvious answer? Thanks for any...
I got a kenmore ultra wash quiet guard deluxe dishwasher for Christmas. My husband installed it and it seems like it is stuck in the wash cycle. It ran for an hour and a half and it never drained, so we finally shut it off. Any suggestions?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
