Ask Experts Questions for FREE Help !
Ask
    moorma's Avatar
    moorma Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 11, 2011, 02:31 PM
    Hampton bay remote
    The hampton bay remote will turn off the fan but not the lights. The FCC ID:L3H2003FANHD
    MODEL:FAN-HD. I have put in new batteries.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Sep 11, 2011, 07:01 PM
    When dealing with a remote I start by checking to see that the dip switches in the canopy receiver match the ones inside the hand held remote, likely they will. I then open the canopy and check for power coming off the receiver when the lights and fan are turned on. Black to white is your power for the fan and it should read 120 vac. Blue to white is the light and it too reads 120. Using the remote hit open fan and the black white combo should be zero vac. Hit OFF Fan and that too should drop to zero. If not insert car key in igbition and drive to Home Depot and get a universal remote kit to replace both receover and remote.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #3

    Sep 12, 2011, 10:15 AM
    You can take the remote apart and clean the circuit board with rubbing alcohol after using a little soap and water. Where the carbon buttons touch the circuit board there sometimes is a deposit that needs gentle cleaning to get off the gunk. Also, wash the rubber pad with the carbon buttons and finish with alcohol and let dry. Then re-assemble and it will be like new. This also works for TV remotes. DrTom4444
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay Remote Video/fan Remote Control [ 16 Answers ]

I have a Hampton Bay Video & Fan Remote Control (Model #UR8050T). It has been working fine for about 2 years until it recently began malfunctioning. It still operates the television, but the use of the fan/light features has stopped working. It will not turn the fan on or off, and the light is...

Faulty remote or is it the remote sensor in the Hampton Bay fan? [ 3 Answers ]

Hampton Bay Ceiling Fan - 4 yrs old. Remote model # UC7078T. Tried turning on the ceiling fan light and it didn't work, so I replaced the battery and I was then able to turn on the light. I then tried to turn off the light and it doesn't work. The light remains on. Nor do any of the fan...

Hampton Bay Remote [ 4 Answers ]

I have a model 166315 which has a double light but not remote. Can I add a remote to this model and if so where do I go to get one?

Hampton bay remote [ 7 Answers ]

I have an H.B. fan/light just recently I changed the battery in the remote and it is still working the light properly, but the fan only works in low speed:confused:

Hampton bay remote control for hampton bay fans [ 2 Answers ]

We cannot get the ceiling light to go off on our fan in the bed room. It would not go on and in the middle of the night is just came on by itself and we can not get it off Joanne Moreland

View more questions Search