Ask Experts Questions for FREE Help !
Ask
    bestofcherie's Avatar
    bestofcherie Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 11, 2011, 12:50 PM
    Are the fuse wires put back on a whirlpool GEW9200LW0 dryer correctly?
    We put a new thermostat fuse and fuse box in our dryer because it was not heating. Now it does not start. Did he put the wires in wrong or what. What do we need to do? What wires go where?
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #2

    Sep 11, 2011, 04:03 PM
    Hi bestof, do you mean you changed the thermal fuse? What is the fuse box? The thermal fuse just has two wires, how many wires were on what you changed?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #3

    Sep 12, 2011, 10:07 AM
    I am confused also. The thermal fuse has only two wires and it's just a connection between two wires and does not matter about the order. What else did you replace? DrTom4444
    bray1land's Avatar
    bray1land Posts: 1, Reputation: 1
    New Member
    		  
    #4

    May 22, 2012, 02:36 PM
    I replaced the rear bearing in a frigidaire dryer but don't remember how the wires go back
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #5

    May 26, 2012, 01:04 PM
    These should show you how to do it: http://dl.dropbox.com/u/8010163/Frig...e%20Manual.pdf
    http://dl.dropbox.com/u/8010163/Frig...20Electric.pdf
    You would have to remove the wires on the door switch, but I don't know what else. Just plug the wires on door switch where the closed connection when not depressed goes to light and the other coming from power is common then the one left goes to other terminal.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wires came loose while changing switch need to get wires matched.keeps blowing fuse [ 2 Answers ]

My question is to match the right color wires to operate ceiling fan and light fixture. The wires came loose before I could match them. The swith has three colors black, red and blue. The colors that are to be matched with are green, red and orange. How do I match these. Additionally it has a...

I have a Whirlpool Electric Dryer that doesn't turn on. Bypassed the thermal fuse still doesn't turn on. [ 0 Answers ]

Just a quick question.

Whirlpool dryer stopped and won't turn back on [ 1 Answers ]

We have a Whirlpool electric dryer - Model #LER3624JQ1 Yesterday, during the drying of a load it just stopped before the clothes were dry and now it will not turn back on. The dryer is about 6 years old and we are a family of 5 with a lot of laundry. We checked the circuit breaker and...

New whirlpool electric clothes dryer / blows a fuse [ 7 Answers ]

I've purchased a new whirlpool electric clothes dryer. It will continue to tumble but one 30 amp tl fuse keeps blowing... no heat. What would cause this fuse to constantly fail?

Can not put back dryer [ 1 Answers ]

My dryer is Whirlpool Model GGW9878JQ2. I have put back drum and I think I have fitted the belt correctly under tensioner and around motor. Motor turn anti-clockwise but drum does not turn. IF I rotate the drum by hand anti-clockwise it turns but motor does not turn IF I rotate drum...

View more questions Search