Not your question?
  Ask your question
  View similar questions
   
  
 Add your answer here.Check out some similar questions!
Replacing starter moter on 16HP V-Twin vanguard engine
 [ 11 Answers ]
 I have a Briggs and Stratton 16HP V-Twin OHV Vanguard Engine I am repairing. I am trying to replace the starter motor. . The bendix of the starter motor is plastic and has broken teeth and therefore does not engage with the main flywheel anymore. In order to accomplish this task I have stripped... 
16hp starter motor
 [ 1 Answers ]
 I have a 16hp b&s.the motor turns over once and stops.I have a new batterie and the cables are new .if I keep trying to start it the starter gets hot.I tried tapping it with a screwdriver to see if it loosens but it does not help.if the starter is bad how do I take it apart and fix it.or is there... 
Where is the starter located
 [ 1 Answers ]
 My car will not start and I was told to look for the starter on my car but I have no idea where the starter is located I have a 98 honda accord can someone help me? It's a 6 cylinder 
Where is the starter on a 96 honda accord located?
 [ 1 Answers ]
 How do I find the starter on a 96 honda accord? 
B&S starter gear, 16hp cast iron single
 [ 3 Answers ]
 
Have a 16hp B&S single cyl cast iron motor that continues destroying the starter gear. Motor has aluminum ring gear and plastic/fiber starter gear. After several starts (3 to 10) it destroys the teeth on the starter gear. I'v checked with my dealer and the parts are correct #s. The ring gear was... View more questions Search 
  |