Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Defective ECM module on furnace blower
[ 0 Answers ]
Trane furnace one year old and ECM module on furnace went out, is there a problem with this part?
Bryant 350MAV blower motor ECM upgrade?
[ 0 Answers ]
I have a Bryant 350MAV and would like to have an ECM blower motor installed to allow for continuous slow speed air recirculation. The unit is 12 years old and runs like a top. I've installed a fireplace insert in my home and the air handle return in that room would recirculate the heat on a slow...
Well pump runs intermitten
[ 7 Answers ]
I have a submersible pump 115 ft down. It has a Square D pump pressure control box. It is a 1/2 hp 3 wire pump with a control box near the well. The pressure tank has a bladder. My problem is that the pump stops at times. The pressure gage gets hung. The pressure control box contacts engage...
Intermitten Hot water to Faucet
[ 3 Answers ]
I have hot water to all the fixtures in my home (Kitchen, Laundry, Bath) most of the time, but occasionally, when I go to turn my hot water on in my bathroom sink faucet, I get nothing. The cold will work. The hot & cold will work in every other fixture at the same time, but only the hot water to...
Intermitten air handler fan
[ 2 Answers ]
I have residential Janitrol electric heat pump that is approximately 13 years old. The air handler fan has stopped working around noon for the past four saturdays, allowing the inside coil to freeze over. Last week it also stopped on Tuesday.I can rotate the thermostat from cool,to heat,to emerg... View more questions Search
|