Ask Experts Questions for FREE Help !
Ask
    dougie1234's Avatar
    dougie1234 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Sep 10, 2011, 04:27 AM
    Tv turning itself on,and changing channels on its own
    Have re set and re-tuned still the same
    FadedMaster's Avatar
    FadedMaster Posts: 1,510, Reputation: 148
    Ultra Member
    		  
    #2

    Sep 10, 2011, 05:02 AM
    Make and model?
    dougie1234's Avatar
    dougie1234 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Sep 11, 2011, 09:22 AM
    Bush a626
    dougie1234's Avatar
    dougie1234 Posts: 3, Reputation: 1
    New Member
    		  
    #4

    Sep 11, 2011, 09:32 AM
    Bush a626
    FadedMaster's Avatar
    FadedMaster Posts: 1,510, Reputation: 148
    Ultra Member
    		  
    #5

    Sep 12, 2011, 05:12 AM
    First thing to try is to unplug the TV for a while (like over night), and plug it back in.

    Second thing is to put some electrical tape of the IR receiver just to make sure it's not a remote control doing it. If it still does it when the IR receiver is blocked, then it is a part inside the TV.

    DO NOT TAKE APART THE TV UNLESS YOU HAVE ELECTRONICS EXPERIENCE, YOU DO SO AT YOUR OWN RISK.

    There are three likely culprits. One is your main board, the other the function board and the third your IR board. In some TVs the IR board and function board are all one part. To test what part it is, disconnect the IR and the function board(s) from the main and see if it still acts up. You can actually leave the function board disconnected (as log as the IR sensor is not part of the function board), and still use your TV with the remote.

    If the TV still acts up with both the function and IR board(s) removed, then the culprit is your main board.

    As far as getting parts, I have absolutely no idea where you can get them for a Bush TV. But hopefully it's just your function board and hopefully it's a separate part so you can just disconnect it and use the TV with just the remote.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I am from AP am interested in telugu channels and some of the English channels sugge [ 2 Answers ]

I am from AP am interested in telugu channels and some of the English channels suggest me the best package which is cheaper in price.. and covers all the requirements

How do I change a Phillips big screen to channels from AV channels without a remote? [ 1 Answers ]

I recently got a Phillips big screen TV, possibly 37-42 inch, from a friend who didn't give the remote or handbook. All I can get is a blue screen with the AV channels. How do I change the TV to a regular channel so I can set up my Direct TV box? Thanks to anyone who can help.

Nut and bolt are turning at the same time while changing transmission filter [ 2 Answers ]

http://forums.maxima.org/5th-generation-maxima-2000-2003/603593-transmission-filter-problems.html Any idea what one can do when the nut and bolt are both turning? How to get the nut off?

DVD player turning off, changing channels ramdomly [ 1 Answers ]

Hello I have a Philips DVD player/recorder that turns itself off, changes channels etc whenever it feels like it. I've had it tested and there is no fault with the player. I was sent a replacement one which does the same thing. I also covered up the sensor (thinking it could be the lights in my...

Delay when changing channels on TV [ 1 Answers ]

Have a new Sony 52in LCD. The problem is when changing channels going to HD from analog or vice versa, the delay is 8-9 seconds. My cable company attributes it to the changing format, 480 to 1080 and vice versa. Can you help?

View more questions Search