Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How do you reduce 220 volts to use an LED light.
[ 2 Answers ]
I want to put an LED light on my transfer switch so I know when the power from the electric company comes on. I am using this in my home in the Philippines so my voltage is 220. I want to buy an LED from Radio Shack and hook this directly to the incoming wires from the electric company. The...
I need a resistor to take 29 volts to 240 ma?
[ 1 Answers ]
my Black & Decker charger died and I have a transformer that I want to use to replace the dead one. The old one was 17 volts DC and charged at 240 ma. The replacement is rated 19 volts DC and testing it reads 29 volts DC output. I need to replace the resistor on the circuit board to reduce this to...
How many volts are halogen lights
[ 4 Answers ]
I have a halogen light fixture that I'm trying to fix/repair... it came from a horse farm. When I climbed up the ladder to measure the voltage of the three prong plug I got 240 volts between the first and second prong... then 110 between the secondand third prong... and then 0 between the third...
120 volts, connect 1 swith to control 3 lights
[ 1 Answers ]
I ran power to the switch, and made the correct connections at the first light, and its bright. However the 2d and third light are dim. Please help.
LED lights
[ 1 Answers ]
I just purchased a few LED screw-in light bulbs. Now when ever I turn off the wall switch, the LED light is dimmed but not off. In these same fixtures with an incandescent bulb, the light goes completely off. How do I solve this problem? The house was built in 1979 with 3-wire 12 gage. View more questions Search
|