Ask Experts Questions for FREE Help !
Ask
    djstroud's Avatar
    djstroud Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 31, 2011, 11:05 PM
    Harley davidson rear wheel
    Keeps coming loose .have replaced bearings ,races, seals, rear wheel adjusters, axle
    cdad's Avatar
    cdad Posts: 12,700, Reputation: 1438
    Internet Research Expert
     
    #2

    Sep 1, 2011, 01:52 AM
    If the adjusters are moving then have you tried using locktite on the threads to help with the vibration? Also how is your swing arm bushing?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Harley davidson troubleshooting? [ 3 Answers ]

Haven't had bike running since I had hip replacement two years ago . Removed carburator and cleaned out jets . Put fresh gas and new plugs and wires on bike with new battery . Tries starting and heard a gurgle and oil on the floor . Bike wouldn't start . Bike is a 1989 fxsts.

Ask harley davidson? [ 0 Answers ]

Will the exhaust header from a 98 flt fit my 90 fltcu Thanks for the help

Troubleshooting harley davidson? [ 0 Answers ]

I have a 2000 HD Ultra Classic. Stored in my basement over winter and started it up a couple times, no problem. Out today and went to start it, thought about it for a second then just started rapidly clicking. Lots of juice in the new battery. Absolutely no corrosion, not even dust right now. I...

Harley davidson troubleshooting [ 0 Answers ]

Positive side of battery touch frame lost all power checked fuses seam fine

Harley Davidson [ 3 Answers ]

The inventor of the Harley-Davidson motorcycle, Arthur Davidson, died and went to heaven. At the gates, St. Peter told Arthur. 'Since you've been such a good man and your motorcycles have changed the world, your reward is, you can hang out with anyone you want to in heaven.' Arthur...


View more questions Search