Check out some similar questions!
When I turn on my ac, the ac outside is not really running. Why?
[ 4 Answers ]
My AC has been working fine. But today when I tried to turn on my AC after I had come back from church, I found my ground floor ac was not cooling but with blowing house temperature wind only. The ac upstairs works just fine. When I checked both ac control panels (one in the ground floor, one on...
45692-001 blower control board will not turn blower on in either heat or cooling mode
[ 2 Answers ]
Armstrong G1N80 furnace blower control board will not turn on fan at all. Not in heat or cooling mode. I can hear a click when fan should be energized, but no fan startup. Pigtailed the fan hot and neutral,and fan works fine. Is this just a blower control board problem, or something else? We had...
Compresor not running
[ 3 Answers ]
Hello, my name is Wil43 What is the problem when the condensing fan is running and the compressor is not running when the contactor is engaged ? :confused:Please help me .
No blower fan turn on when AC running
[ 0 Answers ]
I have repaced themostat, and capacitor, the furnace has no circuit board. The only part left is a relay. Could this be the problem part? The fan will run on after manualy turning on and off.
Heat blower does not turn - Air Handler does not turn on for heat
[ 7 Answers ]
I have an Energy Kinetics System 2000 boiler. It is hooked up to two different zones (two different air handlers). Zone 1 (main house) when turned on at the thermostat clicks and calls for heat, the boiler starts for a bit but the fan/blower never kicks on. Zone 2 (master bedroom) works just... View more questions Search
Add your answer here.
|