Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
My Briggs and Stratton 12.5Hp motor won't start
[ 5 Answers ]
Hi, I have a 12.5Hp B & S vertical shaft engine in my mower and last weekend the plastic starter cog (the one rivetted to the underside of the flywheel) lost a few teeth and it would not start. So I replaced the cog with a metal one and reassembled it. When I returned the flywheel I made sure...
Briggs 4.5hp won't start
[ 1 Answers ]
I have drained and cleaned the tank and carb. New air filter and plug. Changed hose from tank to carb. interior was soft and looked like it was restricting fuel flow. I can not seem to find a lay out on line to show me what the make up is, as far as points, condenser, or elec. Module. Any and all...
Briggs & Stratton 17.5HP hard to start
[ 1 Answers ]
I have a Troy Built Pony riding lawn tracotr with a 17.5HP B&S OHV engine with electric start. Most of the time when I go to start it the engine tries to turn over but seizes. When I remove the spark plug the engine turns over easily. When I replace the plug sometimes it starts and sometimes it...
14.5hp briggs won't start unless jumped
[ 1 Answers ]
I have a 14.5hp Briggs mower that will only start if I start my truck and jump it off, it will not start the battery, not even the truck battery truck has to be running. I have changed the starter then the solinoid and still does it. Once it is started runs perfect and I have tested the battery and... View more questions Search
|