Ask Experts Questions for FREE Help !
Ask
    annie61664's Avatar
    annie61664 Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 20, 2011, 06:45 AM
    Digital ac panel of house unit.
    My digital AC Panel Unit does not light up, what can I do?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
     
    #2

    Aug 21, 2011, 07:45 AM
    There may be a fuse blown on the circuit board. You will have to take it apart where you can get to the wiring and then use a meter to find the problem. Get a wiring diagram so you will know what to look for. DrTom4444

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Updating service panel to 200 amp with feeder to 100 amp panel in old house [ 8 Answers ]

I currently in the process of converting 1000 sq ft of attached garage into living space while doing this we are updating electrical service to 200 amp new service, there is 100 amp service in the old part of the house which will remain but need to be sub paneled from the new 200 amp service. I...

Backfeeding your House panel [ 6 Answers ]

OK, before anyone smacks me, Let me say that I'll use an interlock (two in my case). But here's my question and why a transfer switch doesn't seem to work for me. All the houses in our area have 400A services. They split it at the meter base and run feeds to two 200A panels mounted right...

Kenmore elite dryer digital control panel [ 0 Answers ]

My Kenmore Elite Dryer says F2 when I try to start it. Sometimes the panel is dead also. What do you think I should do?

Wiring from my house panel to my pole barn panel [ 1 Answers ]

I am going to be wiring my pole barn up soon and just need some help on the type of wire to use. In my house I have a 200 AMP service and plan on running a 100 AMP feeder from that panel to my subpanel in the barn. (Just under 100 Feet) I am going to run a 6 gauge ground, two 4 gauge...


View more questions Search