Ask Experts Questions for FREE Help !
Ask
    feerkee's Avatar
    feerkee Posts: 8, Reputation: 1
    New Member
    		  
    #1

    Aug 14, 2011, 03:37 AM
    Washing machine motor capacitor
    My washing machine has two motors. One is 150W-230v/ac and other is 350W-230v/ac.There is only one combine four wire capacitor of 6+12 MFD. Can somebody tell me which is for which motor?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Aug 14, 2011, 07:06 AM

    A meter or color of the leads may help determine.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #3

    Aug 15, 2011, 05:52 AM
    The plate on the side of the motor should tell you the answer. Otherwise, you need a wiring diagram or trace the wires to the motors. DrTom4444
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #4

    Aug 15, 2011, 05:57 AM

    Just say you don't know how to use a Meter, You don't HAVE to disagree because you don't understand.
    Are you in the understanding that a wire may be blue at 1 end and yellow at the other?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #5

    Aug 15, 2011, 02:59 PM

    What color wires are on the Capacitor?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #6

    Aug 24, 2011, 04:22 PM
    feerkee, did you give me a red because of the bedbug problem?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need washing machine manual and motor [ 1 Answers ]

I need a manual for a Maytag Performa Washing machine and a new motor to turn the drum and water pump

Motor on kenmore washing machine smoking [ 0 Answers ]

After replacing drive coupler on my kenmore washer everything works but motor is overheating

In-Wall Washing Machine Manual Shut-off Valve Leaks Into Washing Machine [ 9 Answers ]

My hot water automatic shut-off valve on my washing machine started gushing water. So I figured no problem, I would turn off the water at the in-wall manual shut off valve for the washing machine. But even when I turn it all the way off, it leaks. It leaks into the hose going to the washing...

Washing machine drain pump motor [ 2 Answers ]

At what pumping distance (upward) will the typical pump motor be overstressed?

Can't seem to get the pump off the washing machine motor... [ 1 Answers ]

I have a Whirlpool washing machine, and am pretty sure I need to replace the motor coupler. I got the cabinet off; unclipped the pump (removed the hoses -- oops, probably didn't have to do that); and it LOOKS like the pump could be coaxed off the motor -- and it almost does. The bolt-like drive...

View more questions Search