Ask Experts Questions for FREE Help !
Ask
    ghmerrida111's Avatar
    ghmerrida111 Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 9, 2011, 12:26 PM
    Compress fan will not cut off
    Hi I'm George
    I install a new motor just like Trame28'\ Brown and Brown/ white to each side of capacitor
    Black and white to T1 and T2. But now the fan will not turn off?
    Can you help me out thank you George
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #2

    Aug 9, 2011, 01:00 PM

    Fan should be on the Load side of Contactor, or contactor is stuck closed, or thermostat is not interrupting compressor control wire.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What pressure is required to compress. [ 5 Answers ]

What pressure is required to compress 180mL of gas at constant temperature to a volume of 24mL if the initial pressure is 300mmHg? How can I do this problem?

Furnace fan will not cut off [ 1 Answers ]

Left for the weekend and when I came home my Goodman furnace fan would not cut off. The batteries had died in my Hunter thermostat. I've replaced the batteries and it still will not cut off. What would cause the fan to stay on?

NO AC, compress on but no fan [ 8 Answers ]

Hello, I turn my AC on for the first time this year. The compressor outside came on but the fan does not come on, in the furnace. I hear nothing going on in the furnace. The heat works fine. The controller board was change over the winter. Any ideas??

Compress Screen [ 1 Answers ]

Often when I start up my computer I get a compressed screen in the center of my screen. I have no idea what causes this, so I don't know how to fix it. I recently had a new mother board and processor put in, and had my hard drive reformated. So I was not expecting any problems. This problem has...


View more questions Search