Ask Experts Questions for FREE Help !
Ask
    jamkin's Avatar
    jamkin Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 31, 2011, 08:43 AM
    Fixture problem
    I have this same fixture, but mine does not seem to work. It's seems to be stuck. Any suggestions on how to maybe loosen it so that is turns to remove?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Aug 1, 2011, 04:14 AM
    Need to provide more information.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Light fixture flickering even new bulb. Ballast problem? [ 1 Answers ]

My round fluorescent kitchen light started flickering and I though it was the bulbs. After going to the store I replaced the 12" bulb but they were out of the 8" bulb. Turn it back on and both bulbs are flickering. I'm thinking it's a ballast problem, right? I've never repaired anything...

Fluorescent tube Fixture Problem [ 1 Answers ]

I have the following situation and I want your opinion and advice: ==> 1 light switch controlling 1 light fixture with 1 magnetic ballast(120 Vac) and 2 X F96T12/60 W fluorescent tubes. Problem: Both fluorescent tubes initially light when the light switch is turned on however, after a...

I am having a problem with a fluorescent light fixture [ 3 Answers ]

I have a fluorescent light fixture in my bathroom ceiling mounted. It has two circular tubes, on is 32 watt and the other is a 40watt. About two years ago the 40 watt tube burned out and I replaced it. All was well. About a year ago the 40 watt burned out again. About 6 months later the 32 watt...

Ceiling Fan Light Fixture problem? [ 10 Answers ]

Well the fan / light combination is only just over a year old. It has a remote control for the three speeds of the fan and the light on / off. Basically the other morning when trying to turn on my light - it wasn't turning on. The bulbs had power to them as the filaments were barely lit up,...

Replacing Ceiling Fixture Problem [ 1 Answers ]

We are trying to replace two single light pendants with two double lighted ceiling fixtures. In the room there are three single pendant lights that are controlled with a single light switch. The problem we are having is that the new ceiling light fixtures have two sets of black/white/ground...

View more questions Search