Ask Experts Questions for FREE Help !
Ask
    masterevil1990's Avatar
    masterevil1990 Posts: 75, Reputation: 1
    Junior Member
     
    #1

    Jul 29, 2011, 10:21 PM
    Car accelorator sticks
    My 1990 civic just had the engine to a 1998 put in it...
    Lately the engine has been revving high...
    If I pull back on the gas pedal the rpm returns to normal like its not returning to original position placing tention on the cable...
    How can I fix this
    odinn7's Avatar
    odinn7 Posts: 7,691, Reputation: 1547
    Entomology Expert
     
    #2

    Jul 29, 2011, 10:37 PM
    Make sure the return sprigs are on correctly. Make sure the throttle cable is hooked up right and there are no kinks or anything holding it up.
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #3

    Jul 30, 2011, 04:42 AM

    Adjust the throttle cable--loosen the jam nut a turn and tighten the inside nut against the bracket.
    masterevil1990's Avatar
    masterevil1990 Posts: 75, Reputation: 1
    Junior Member
     
    #4

    Jul 30, 2011, 12:27 PM
    Comment on TxGreaseMonkey's post
    And the jam nut and bracket are located under the hood at the intake manifold correct ?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #5

    Jul 30, 2011, 01:04 PM

    Yes.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How many sticks of butter in a pound [ 2 Answers ]

How many stick butter in a lb

The q sticks and types in the search [ 1 Answers ]

The letter q sticks and when the computer starts up or when I try to do a search the q is typed all over the search box, or I can hear it typing in the background after the computer starts up. Now other keys are not responding - the I, o, e, left shift and caps lock are those that I've discovered

Pump pressure sticks [ 3 Answers ]

Hello: I have a water pump indoors with a bladder tank. I have the pressure switch set at 20 psi to 40 psi. But yesterday the pump started actioning crazy. The pump will come on as soon I turn on water and immediately drop to 30 psi and stay there. The pump will stay on as long as the water is...

Toilet flapper sticks [ 2 Answers ]

I replaced flapper because toilet ran constantly with a small leak. It worked beautifully for a couple of months, but now the flapper sticks in the up position so it is running again for a different reason. Please help! :confused:

Memory Sticks Losing IT (and so am I) [ 10 Answers ]

Hey Guys, Got a problem that none of the computer whizzes that I know can figure out. I have two 512 Meg memory sticks in my memory bays. Some times They both run at 512 a piece but lately one has dropped down to 32 megs from 512 to over a few days time in 64 MB jumps. The other went down...


View more questions Search