Not heating to temp.

Check out some similar questions!

Heating turns itself off before reaching desired temp [ 9 Answers ]

Background: I have an older Trane furnace (manufactured 8/1994) made by American Furnace Inc. (The Trane Company, Trenton, NJ) model TUJ080A936A0. The module controller is by White-Rodgers Emerson Electric Co. Model 50A52-101. There is no gas pilot light. Problem: Recently, my gas valve will...

Furnace heating but thermostat temp not rising [ 1 Answers ]

My furnace is running and putting out heat. However, my thermostat temperature is not rising, so my furnace runs continuously. Does anyone know why this would be? Is my honeywell wall unit going bad on me? The thermostat is only about 2 years old and my quietside furnace is only about 2 years old....

Fan does not shut down after heating to temp [ 10 Answers ]

I have a rheem criterion II funace about 13 years old. After the furnace heats houst the gas and flame shut down but the fan continues to run until I manually shut down at thermastat. Which part do I need to order?

Heating duct air temp [ 3 Answers ]

Is there an basic or average temperature that the warm air should be that is coming out of the heat vents? It seems that even at it's warmest the temp of the air coming from the vent is only about 74 degrees, which once it moves out of the vent a couple of feet feels cold.

Heating unit not reaching room temp [ 1 Answers ]

My heating unit doesn't generate enough heat. Everything comes on but stops running before reaching room temperature. I've turned on and off the wall-thermostat and it works. Is this a sign that the wall-thermostat is going bad or went bad on me?

View more questions Search

Check out some similar questions!

Add your answer here.