Ask Experts Questions for FREE Help !
Ask
    seniorlady's Avatar
    seniorlady Posts: 2, Reputation: 1
    New Member
     
    #1

    Jul 27, 2011, 12:05 PM
    AC can't lower temp to thermostat setting
    If anyone can help, I'd be very grateful. I am a widowed senior on social security and am at my wits end. I've lived in a fourth floor condo for four years and my AC is under warranty. The problem: The AC seems to run constantly, but can not seem to reach the "set" temp on the thermostat especially on very hot days. It is a HW/HWC Series Magic-Pak Through the Wall Unit by Lennox. Right now it is 90 degrees outside, my thermostat is set for 75 degrees and the inside temp of my condo is 78 degrees. On very hot days, the temp inside can go as high as 82 degrees. It has even tripped the circuit breaker a number of times. I've had the AC guy out as well as an electrician. The electrician says the problem is not electrical and the AC guy can't seem to find the problem although he has been diligent in his efforts. I am so frustrated... and the forecast for Friday is 103 degrees! Any thoughts or ideas? Please help!
    Handyman2007's Avatar
    Handyman2007 Posts: 988, Reputation: 73
    Senior Member
     
    #2

    Jul 28, 2011, 05:36 AM
    It sounds like the A/C unit is not large enough to handle the cooling load. It is very common for people to undersize A/C units. You don't say the size of the room you are trying to cool. Rule of thumb is 5000 BTU for every 10x14 room. The heat load in a 4th floor condo would be pretty great so the unit is more than likely undesized.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #3

    Jul 28, 2011, 11:48 AM
    It probably worked fine until it hit 100. Very common question asked here but only in summer. Your unit is probably working fine but does not have enough BTU to overcome the ambient load. Does it work better at night and when the temp is 90?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heat will not reach its temp setting [ 1 Answers ]

In the morning my heat will not reach the temp setting of 73. It will cut off at 68. In the evening it will reach the temp setting of 73. The furnace and heat setting device is only 2 years old. I do not understand why it works in the evening but not in the morning. Any ideals

Why woul the furnace continue to run when the thermostat is up to temp setting? [ 1 Answers ]

Our furnace continues to run even though the thermostat reads 68 deg. It will shut off for a few minutes then will start back up 10 - 15 minutes later. I checked the thermostat and it still said 68 deg. Is this a thermostat issue or a furnace issue?

Lower Temp [ 2 Answers ]

What's it mean when your not running a fever but your temp is only 94.5

Furnace not kicking on when temp drops below thermostat set temp [ 1 Answers ]

I've got a Beckett oil heat water on demand furnace that heats through baseboards. Since this past weekend the furnace hasn't been kicking on when the temperature drops below my set temp of 68 degrees. I have to go down to the furnace and simply touch the top of the reset box for it to kick on. ...

Setting temp at home during Winter [ 2 Answers ]

What's the advisable temp I can set it at home during winter. Up to what's the advisable max temp I can set? Thanks Senthil.


View more questions Search