Ask Experts Questions for FREE Help !
Ask
    Ainsmyers's Avatar
    Ainsmyers Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 23, 2011, 07:01 AM
    Finishing shower
    Shower walls not recess. Best way to finish it so it looks good
    Ed Case's Avatar
    Ed Case Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jul 23, 2011, 08:09 AM
    Bump the framing studs over until they are tight to the shower sides then secure through the fiberglass shower flange into the framing studs with 1 1/4" drywall screws to set in place.

    I have a Video that shows you how to finish a shower in the basement in my basement finishing store located at
    The Basement training Store
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Finishing drywall against a shower surround [ 15 Answers ]

What is the best method for finishing the drywall edges when placing them over the panels of a 3-piece, pre-fab shower surround unit. I know caulk is an option but it's 5/8" greenboard and it would seem that you would need a pretty perfect cut to make this look good seeing as it's the most visible...

I am finishing my bathroom in the basement and I've found that the shower fits the ro [ 4 Answers ]

I am finishing my bathroom in the basement and I’ve found that the shower fits the room in the back, but has about ¼” gap on either side in the front. I’ve read that you can shim but I don’t understand how I’ll be able to run green board over the flange of the shower and still have it line up with...

Cement Shower floor finishing for tile [ 3 Answers ]

We poured a mortor walk-in shower and curb. I sanded the shower floor and put the tile down. It didn't want to stick, so I removed the tile and sanded it again. It seems to be grity (sandy) is this the way it's suppose to be? Or what do I need to do. We can't afford a contractor at this time. Could...

Basement finishing [ 1 Answers ]

Hi all, I'm going to be working on finishing part of my basement to include installing a bathroom. I am wondering since the floor is concrete do I need to install some sort of sub-floor (example: bathroom tile or vinyl-and other room carpet) or will all materials work on the concrete? Thanks for...

Finishing [ 1 Answers ]

Should I use waterbase or Oil paint to finish white pine?

View more questions Search