Ask Experts Questions for FREE Help !
Ask
    wmstrong's Avatar
    wmstrong Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jul 22, 2011, 07:46 AM
    Bladder tank
    How long does it take to drain the bladder tank
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
    		  
    #2

    Jul 22, 2011, 09:48 AM

    This would depend on the size of the tank. I have a 40 gallon and it takes me about 5 minutes.

    If u don't turn water off to tank, it will never drain.

    Chuck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Storage Tank or Bladder Tank? [ 8 Answers ]

We just had a new well put in. The well person installed a 220 gallon storage tank (not bladder) when we turn on our sprinkler system our submersible well pump cuts in every 50seconds. We are using approximately 16 gallons per minute. Should the well person have put in a bladder tank instead of a...

Bladder tank pressure [ 2 Answers ]

We have well water. The pressure has streadily decreased. How do I check to see if the bladder tank is working properly.

Can't charge tank with new bladder [ 6 Answers ]

Hi, I have a flotec 35 gallon pressurized tank with a busted bladder, bought the new bladder and placed it inside, but can't seem to charge it, the air keeps coming out of the bottom hole of the tank, isn't the new bladder suppose to hold the air in? Everything is tight as can be, but no luck...

Replacing a bladder tank [ 2 Answers ]

I have a 18 year old Perma Tank PAD 20. According to all the prior dialog on this site about pressure drops and short cycling, it sounds like I have a ruptured bladder. The tank clunks all the way to the top and water comes out the pressure valve. I'm pretty handy. Is a bladder tank something I...

Bladder tank on well system [ 1 Answers ]

Hello, thank you for attempting to help. I have a little water pressure in the morning, but after running the dish washer I have just a trickle. I have looked at the gauge at my tank and I can't get above 15 psi. I have also turned the power of to the submersival pump, turned the nearest faucet on...

View more questions Search