Ask Experts Questions for FREE Help !
Ask
    locust1's Avatar
    locust1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 18, 2011, 04:56 PM
    why does my murray rider blow fuse when hooked to bat?
    when I hook up the battery to the positve side. The fuse on the red wire from the cylionoid to the switch keeps blowing. Can you tell me why? It's a murray riding mower 38608X92C
    cdad's Avatar
    cdad Posts: 12,700, Reputation: 1438
    Internet Research Expert
    		  
    #2

    Jul 18, 2011, 06:34 PM

    Fuses are the weak link built into the electrical circuit so if you get a short (like what your describing) it doesn't burn through the wiring harness. You need to trace where the short is.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Murray rider [ 3 Answers ]

I have a 20 horse briggs an stratton rider... when I try to start it all it does is click at the solenoid... just got a new one still doing the same thing... what would I check next

Murray rider [ 1 Answers ]

Hi again... I ask a question about my 20 horse briggs an stratton murray rider... I made sure I have a fully charge battery on it an it is still clicking at the solenoid... u said start with the starter first... what try getting a new one or is there something I can do to that one?? the motor turns...

Murray rider [ 2 Answers ]

I have a 20 horse briggsanstratton rider... when I try to start it all it does is click at the solenoid... I just got a new one an its still doing the same thing... what would I check next

View more questions Search