Ask Experts Questions for FREE Help !
Ask
    ranniedona's Avatar
    ranniedona Posts: 2, Reputation: 1
    New Member
     
    #1

    Jul 10, 2011, 03:46 PM
    How to move rear drive shaft when repaiaring clutch arm yoke in 1982 Datsun 280ZX?
    You can't get to the bolts for the frame to drop the drive shaft. Any suggestions??
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
     
    #2

    Jul 12, 2011, 05:27 AM

    The rear flange on that driveshaft is simply bolted to the rear pinion yoke.
    Unbolt the flange and after placing a catch pan at the transmission tailshaft, slide the shaft toward the rear.
    If you can't get at the bolts for the flange, you'll need to rotate the rear axle until you can.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

The brake/clutch line has become disengaged near the rear by the stands [ 1 Answers ]

There doesn't seem to be anything broken, but I can't figure out how to attach the line so it remains tight.

345 john dear the clutch is stuck on shaft [ 8 Answers ]

I have to pull the motor on a 345 john deer but the electric clutch is stuck on the shaft. Any ideas on how to get that off?? Thanks

1982 Honda Civic - knocking sound from the rear. [ 1 Answers ]

We recently acquired a 1982 Honda Civic Wagon with only 95,000 miles. It's in great shape, but started making a knocking sound from the rear. The brakes are also a little jumpy, but all is well if I down-shift to brake. The car isn't shimmy-ing, but the knocking is problematic.

Snapper rear rider wants to die when clutch is engaged [ 9 Answers ]

Snapper Model 281123BVE 11 HP starts right up and idles good until the clutch/brake is released. Then is loses most of the power and barely spits and sputters. I have cleaned the carburetor, replaced the spark plug, fuel filter, air filter and cleaner. The seat switch, deck switch and rear...


View more questions Search