Ask Experts Questions for FREE Help !
Ask
    merch43's Avatar
    merch43 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 5, 2011, 07:05 AM
    I need just the remote... not the receiver
    On my remote, the "light" button is pushed in at all times. I have to push harder to turn the light on/off. It finally stopped working. The controller will only turn the fan on/off. How can I purchase the remote control only... without having to purchase the remote AND receiver togther?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jul 5, 2011, 08:32 AM

    First you need to provide info on the Controller.
    I have had luck with Ebay.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    Jul 5, 2011, 09:08 AM

    Brand and model of remote would help me get you an answer
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I want to remove remote receiver from my fan [ 2 Answers ]

Fan/ light not working. Wireless wall transmitter seems fine. I want to remove receiver from fan and just be able to use pull chains. How is this done?

Two Ceiling Fans One Remote Receiver [ 5 Answers ]

I am placing two ceiling fans on one switch 30 feet from the floor. My question is two-part... Both fans are the same brand, Hampton Bay, and include remotes (also same and same dip switch settings... ) The fans DO NOT have a manual reverse switch, reverse is controlled through the remote(s)...

Where does remote fan receiver go [ 1 Answers ]

Ok. Just brought a Hampton Bay Redington IV and trying to install it. Where does the box for the remote go inside of the fan?

Remote receiver does not fit in canopy [ 2 Answers ]

I am trying to add a remote control to my Hampton Bay ceiling fan. It is mounted on a vaulted ceiling with a 3ft. Down rod extension. The remote control receiver does not fit in the canopy. The ceiling is 16ft. And the fan/light is heavy so I would really like to not have to take it down.

Remote/Receiver not working [ 1 Answers ]

Good day to You. I am experiencing some problems with our new Hampton Bay ceiling fan. It seems that the Remote will not operate fan nor the lights. We made sure that all switches on Receiver and Remote are at same settings. My wiring diagram is as follows: Two sets of wires in ceiling junction...

View more questions Search