 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
No, you are about to have a fire. Unplug drier and disassemble and clean it out. You need to disassemble drier and clean out every part of it. That means to wash out all parts except motor which you vacuum out. Make sure to check your exhaust vent and clean it out, too. Driers are the number one cause of house fires in the US. The job is easy to do and all you need to do is look on YouTube to get directions on how to do it. Buy a belt and replace it while you have it apart. They only last so long and you should replace it every two years or so when you clean the drier. You could probably fill a five gallon bucket with the lint buildup from a drier like yours. DrTom4444
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Where is the heating element locate on a roper dryer by whirlpool
My washer used to adgitate, stop,pump out, and then start to spin. Now it adgitates and instantly starts to spin. What part has failed?
Hello all I have whirlpool Roper electric dryer that has no Heat. All else seems normal with motor and blower 1. the oulet has 240 V 2. I replaced the heating element and I am still not getting any heat. Does anyone have any Ideas where I can go from here to find the problem?:confused:
My old Roper electric dryer worked fine yesterday and last night. Now this mornign I went to turn it on, and Nothing! No sound.. Nothing? Any ideas? We checked the plugs, vacumed out the dust, still nothing. What else should we be checking? The washer next to it runs fine.
My dryer start on but is not heating up. Can some one give an answer what I need to do. Thank you, evertracy
View more questions Search
|
