 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
No pressure on tub/shower
I just installed a new tub/shower fixture. When I turn it on there is almost no pressure. However when I turn on a sink in a bathroom at the other end of the house, the new tub/shower fixture has full pressure. What could cause this?
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
A couple months ago we had a builder come in to replace our tub. After it was done, we noticed a significant drop in our water pressure out of both the tub faucet and the shower faucet, so we are sure it is not the shower faucet head. Since then, we have noticed a steady decrease in water...
How do I get more water pressure in the tub and shower? Even though old cartridge has been replaced, nothing is happening.
The water pressure in my master bath is dropping. Not sure what to do to fix it? We went on vacation and it was fine came back and the water pressure was much less. It is fine in the rest of the house. Thanks for your time hope you can help
I've been searching this helpful site and think I have a vague answer, but as it is plumbing, and I am NOT a plumber, I will try to get more specifics. I'll be as brief as possible. Slow but sure, shower has become a trickle. Removed shower head and ran water, still a trickle. From what I...
I've read a few posts regarding sinks with no pressure, but have not found anything regarding tubs. From what I have read, there has been mention of cleaning the aerator? How do you do this? And could this be my problem? Are there other issues that I should check for? Any help would be greatly...
View more questions Search
|
