Ask Experts Questions for FREE Help !
Ask
    dia88's Avatar
    dia88 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 21, 2011, 05:17 PM
    The blade keeps loosening
    My new mower was working fine this morning but an hour later I was mowing my neighbours lawn, because his machine broke and I heard a strange noise, I was cutting tall grass and thought I should get my side sidecharge, and that's when I heaard the noise. I turned it over and the bolt was loose, so I tightened it and started it again, same thing so I undid the bolt and checked it, everything looks fine, so I tighten it again, and it loosened right after I started it. What is going on?
    cdad's Avatar
    cdad Posts: 12,700, Reputation: 1438
    Internet Research Expert
    		  
    #2

    Jun 21, 2011, 05:19 PM

    You can either try to torque it to the factory specs and see how it does or use a little loktite on it so it doesn't vibrate loose.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Behind washer/dryer loosening spigots [ 1 Answers ]

I can't seem to loosen the spigots for the cold and hot water. I want to replace them. HELP!

Loosening a Toilet Tank Supply Valve. How Do You Do It? [ 4 Answers ]

Hi, All! Upstairs toilet tank supply valve is stuck to what it's threaded to on the floor. When trying to turn it with a wrench, things are starting to bend! I've replaced it previously with success. Can't figure out what the problem is... What to do? Thanks!

How do I price a snow blade for a Craftsman garden tractor, 42" blade? [ 0 Answers ]

I need to price a 42" snow blade to sell, used and in great shape, for a model 917.2720601 Craftsman garden tractor.

Loosening a 4-valver diverter in my shower [ 2 Answers ]

My husband has been trying to remove the 4-valve diverter in the shower and it will not budge. Our home is aproximatley 30 years old. It looks like the pipe connecting to the converter is copper. We have sprayed w-d 40 and have given it plenty of time to work. However we CAN NOT get it off. Do you...

Loosening a shower head that's been glued on [ 1 Answers ]

I have a showewr head that I need to remove. A simple wrench does not work because it looks like some type of pipe glue/bonding material was put on when it was installed. Is there any sort of chemical I can use to loosen this glue so I can remove the shower head?

View more questions Search