Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Is a closet/toilet flange with a height of .375" to .50" above floor to high?
[ 4 Answers ]
I'm remodeling my bathroom. I tore up an old mud job floor leaving the closet flange /toilet flange at a height of 1.375" to 1.5". I will be adding 3/4" subfloor with 1/4" tile. This should leave me a flange height of .375" above my finished floor, counting my mortar. Will a closet flange with a...
Low Water Level in Toilet BUT rises high when flushing.
[ 2 Answers ]
I'm sorry if this has been asked already, but I couldn't seem to find an answer to what I was looking for -- or that I didn't seem to understand: My toilet, one morning, suddenly had a low water level in the bowl. In the tank I noticed that the water is at the brim of the overflow tube. ...
The Ph level in my WATER is too high and is stunting my plants.
[ 1 Answers ]
The Ph level in my local water level is too high and is stunting my plants I believe. Can I use muriatic acid mixed in my watering can to help lower this level? I remember growing up that my mom used to use muriatic acid all the time in her gardening and unfortunately she is no longer with us to...
Toilet water level too high
[ 2 Answers ]
I have just purchased a house with two Kohler toilets and the water in the bowl is filling higher than necessary. I have tried adjusting the riser valve which only lowers the water in the tank, not the bowl. Any suggestions. Blueleader10:)
Toilet water level too high
[ 2 Answers ]
When the bathroom toilet is flushed, the water level is higher than it should be, there is spluttering of water coming from the bath plug hole and knocking sounds from the air admittance valve fitted below the hand wash basin. Water draining from the basin also sometimes causes spluttering in the... View more questions Search
|