 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hot Water Pressure Reduces When Heated With Immmersion Heater.
Help. My hot water in bathroom reduces to a trickle when the cold water is heated up with the immersion heater. If I heat the water up and then turn the immersion off for 45mins-1hour the water pressure is massively improved.Any ideas would be very much appreciated.
Thanks in advance. |
||||
Check out some similar questions!
Hi, I own a small plumbing service and have a problem I've never encountered before. I installed a new top vented gas water heater for a customer. Turned the main back on, bled air out of the lines, etc. Problem is there is no hot water pressure throughout the house. Cold water pressure is fine....
Recently installed an indirect hot waer heater to replace the using the coil in the boiler to heat our water. Now, the shower hot water pressure is quite low. Can the installation of an indirect hot water heater effect hot water pressure. We expected lots of hot water and better hot water...
It's a sealed system, have to keep re-pressurising it to get tap to work. Pressure always drops. There no leak.
I have very low water pressure from my hot water heater. I can't find anything wrong.. any ideas?
When I turn on the hot water in my shower, the pressure drops and trickles out of the shower head. It only seems to be the hot side which leads me to believe that there might be an issue with the water heater. I think it drops in the bathroom sink as well but not the kitchen sink. The water...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
