 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hampton bay fan won't start?
The fan and light have worked for years via remote - suddenly the fan doesn't work but light still does. This happened once before and I was pulling it out to install a new one and it started working again. That made me think that pulling power from the embedded controller chip probably rebooted it and made it work again. So this time I flipped power off from the breaker - but the fan still won't work after a recycle.
|
||||
Check out some similar questions!
Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...
After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...
Hello just bought a house with a hampton bay fan and light, remote control no pull chains. At night the lights will come on without even touching the remote. Also the fan shut itself off last night. What do I need to do?
I have a Hampton Bay with a light. The light works but the fan does not. I can feel a slight hum of the motor and sometimes it appears the blades may move a bit but really there is nothing. It is about 15 yrs old. I have another one like this, same age and it works fine. Before I start taking...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
