 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How to replace honeywell T8401C and to the honeywell RTH2300 model.
In the old setting, red wire -R, white wire -W, green wire-G, yellow wire -Y, and blue wire -C.
In the RTH2300 model, I have the R,RC,W,G,Y,O/B options. I tried connection R,W,G and Y to the corresponding wired colors, and left the blue wire unconnected. Can someone please help. Thank you. |
||||
Check out some similar questions!
Howdy, Thought Id try this out. I have a Duo-therm six wire thermostat that I am replacing due to the very common circuit board problem with these models. I have purchased a Honeywell RTH2300 digital with heat pump connections. I don't have a heat pump, I didn't realize that it had this when I...
Today I purchased a Honeywell RTH2300 Thermostat. Pretty simple I thought! Hooked up the Red Wire to the R terminal, White to the W terminal, Green Wire to the G terminal and the last color I had was a light blue wire, did not have a light blue terminal, but there was a O/B which I believe the O...
Hello, I installed a new HOneywell thermostat in my house, heat only (2 wires: R & W). The thermostat is kicking the furnace/fan on for 10 second intervals, with 10 seconds in between, over the course of half an hour (usually when transitioning from cold to warm modes. i.g. leave to return). ...
I'm trying to replace my Honeywell T87F thermostat with a Honeywell RTH7500D. Have tried all combos and can't seem to get it to work. Here's the 4-wire connections to the T87F: Blue Wire --> Y terminal White Wire --> W terminal Red Wire --> R terminal Green Wire --> G terminal Thanks in...
I have a Goodman ac/heat system. I recently installed a new Honeywell RTH2300 thermostat. Now, for some odd reason, the thermostat will not control the temperature correctly. If the heat is set t0 come on at 72 degree, the thermostat will not tell the heat to kick on until the temperature in the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
