Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Payne compressor 8 years old it is cooling house some is that the problem
[ 1 Answers ]
Was not cooling well, but still cool.. tech said that one of the compressors valves were bad it is an eight year old unit. Does this sound correct?
Need replacement for fan control of payne furnace model # 80fau-12b-c.
[ 1 Answers ]
The part # is af314-01-2785-d-2-7d by ther-o-disk? Thanks.
6 year old Payne Heat Pump compressor failed
[ 1 Answers ]
The compressor on my 6 year old Payne Heat pump failed. The HVAC guy offered 3 solutions. 1. replace compressor - cost $1100 -$1300 2. replace whole outside unit - cost $2500 3. replace everything with new, more efficient unit cost: $7k+ It is Payne model PH10 2.5 ton R22. HVAC guy...
A/C Compressor Replacement
[ 18 Answers ]
I know I'm going to get admonished for this but... here goes. I want to replace just the compressor unit in an older Weathertron outdoor unit. Question: can I do it myself? Yes, I'm mechanically competent but not HVAC trained. And, no I don't really care that newer units are more efficient....
Payne Control Card Replacement Question
[ 2 Answers ]
Manufacturer: Payne 395A AW 48090 Age: 14 years Efficiency: unknown Type of system: forced air Type of fuel: NG. Hello, I have a question about the circuit board on a Payne residential HVAC unit. When I turned on the heat this year, there was the usual sounds of the unit firing up, but... View more questions Search
|