Ask Experts Questions for FREE Help !
Ask
    winkstcyr's Avatar
    winkstcyr Posts: 2, Reputation: 1
    New Member
     
    #1

    Jun 13, 2011, 06:49 PM
    Stop vibration with new blade
    I have a snapper 33inch rider about 3 yr old.. I hit a water outlet and bent the blade real bade.. I bought a new blade and a new blade holder but I can't remove the blade holder to attach the new blade. The mover cut with the new blade but tends to have more vibration then it had before. How can I tell if the shaft is bent or just the blade holder
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Jun 13, 2011, 06:54 PM

    What exact model do you have? Maybe we are just saying this differently but the holder does not come off to replace the blade, you just remove the two bolts in the blade. http://www.searspartsdirect.com/part...P0809010/00012 When you hit something and get vibration it can be from any one of theses issue starting with the first most frequently" bent blade, bent spindle, bend crank shaft. The only way to rule out a bent crank is to remove the blade and the spindle. If you still have vibration your crank is shot.
    winkstcyr's Avatar
    winkstcyr Posts: 2, Reputation: 1
    New Member
     
    #3

    Jun 14, 2011, 05:46 AM
    Comment on ballengerb1's post
    I have a Snapper 331723DBE. The blade is attached by two bolts to a bar (threaded blade holder) that attaches to the spindle shaft. Is there an easy way to get the blade holder to come loose from the spindle?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #4

    Jun 14, 2011, 07:14 AM

    Did you open my link, it has a diagram of your spindle. Remove the blade first and then the one large bolt centered on the spindle

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What is quieter a 3 blade or a 4 blade conderser fan [ 0 Answers ]

Is a 3 blade fan quiter than a four blade

How do I stop a loud vibration in a vertical plumbing drain pipe? [ 3 Answers ]

I have a septic system and just installed a sump type pump to pump laundry water up from the basement into the septic system, but every time it turns on the pipe vibrates very loud! I installed a check valve in the vertical pipe as well. Any thoughts to stop the vibration?

How do I price a snow blade for a Craftsman garden tractor, 42" blade? [ 0 Answers ]

I need to price a 42" snow blade to sell, used and in great shape, for a model 917.2720601 Craftsman garden tractor.

A/c vibration [ 3 Answers ]

Hi, I have a two story 5 yr old house and has central heating system. The first floor has master a/c control and second floor the slave a/s unit. The problem is whenever the a/c unit is on the apart from the a/c low noise, the walls, room doors when closed and ceiling filters vibrates. It is...

Design Of Grill Blade Thickness ( Gravity Louvered Grill Blade) [ 3 Answers ]

Kindly Design An Gravity Louvered Grill, It is Required For Staircase Pressuriation System Design Thickness Of Blade Such That It Should Lift When Pressure Exceeds 50 Pa,& Close When Pressure Drops 50 pa It Is a 20 Storey Building ( 20 Staircase) System Pressure 50 Pa


View more questions Search