Ask Experts Questions for FREE Help !
Ask
    dallasfool's Avatar
    dallasfool Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 13, 2011, 12:08 PM
    Murray rider stopped running
    Murray rider stopped running,will not start when I turn the key,but with parking brake on and jump the silinoid it starts,I sit on seat and release parking brake it stops running again,when I'm not sitting on rider seat it runs,but I still can't start mower with key,and parking brake is on,and when I engaged the blades and release parking brake it stops running?
    dallasfool's Avatar
    dallasfool Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jun 17, 2011, 10:09 AM
    Well I thought it was the safety switch under the seat,but it wasn't,then I replaced other two safety switches,still wouldn't start,so I replaced the solenoid,and it fired right up,with the key,tks for your help.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Murray rider [ 3 Answers ]

I have a 20 horse briggs an stratton rider... when I try to start it all it does is click at the solenoid... just got a new one still doing the same thing... what would I check next

Murray rider [ 1 Answers ]

Hi again... I ask a question about my 20 horse briggs an stratton murray rider... I made sure I have a fully charge battery on it an it is still clicking at the solenoid... u said start with the starter first... what try getting a new one or is there something I can do to that one?? the motor turns...

Murray rider [ 2 Answers ]

I have a 20 horse briggsanstratton rider... when I try to start it all it does is click at the solenoid... I just got a new one an its still doing the same thing... what would I check next

View more questions Search