Ask Experts Questions for FREE Help !
Ask
    polosport113's Avatar
    polosport113 Posts: 2, Reputation: 1
    New Member
     
    #1

    Jun 13, 2011, 08:01 AM
    I have an older model craftsman riding mower that turns over, but doesn't start.
    I've changed the spark plus, fuel filter, and added new fuel. The engine will crank once I put fuel or starter fluid in the air filter, then die once it is used. I took off the fuel lines to see if fuel flowed, and it did. I also sprayed carb cleaner in it just to see if it was gunked up. It sounds very good when its running which means to me that the engine is in good shape, and it's just not getting any fuel to flow to it. Any suggestions would be great. Thanks!
    polosport113's Avatar
    polosport113 Posts: 2, Reputation: 1
    New Member
     
    #2

    Jun 20, 2011, 09:29 PM
    I actually fixed my mower last week. The issue was the "float pin" in the carburetor. I took the bolt out if the bottom of the carburetor and pulled the bowl off. There is a white U-shaped piece with a pin in it. I pulled the pin out and dropped the U-shape piece down, and cleaned off the pin with carb cleaner. Once I put everything back together, I sprayed some starter fluid into the air cleaner area then it started and continued to run. Hope this info helps someone else out.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman riding mower stalls on turns [ 7 Answers ]

I have a Craftsmen riding mower about 6 years old on tight turns it backfires and sputters, almost stalling. It sometimes does the same on unlevel ground. It continued to do this even after I changed the plug and fuel filter. I just find it odd that turning the wheel tight would cause this to...

How do you find the model # on an older Craftsman riding mower. The id decal under th [ 1 Answers ]

I have an older Craftsman riding mower. The id decal under the seat is unreadable. Is there a mdeal plate or something sonewhere that I just haven't found.

Craftsman mower won't start but turns over [ 1 Answers ]

Have an older Craftsman mower, Briggs & stratton engine, has spark, appeas to be getting fuel, electric start, turns over but won't start. It says have no compression but I can feel the air coming out of the spark plug and carb. Any ideas? The piston appears to be in pretty good shape. Jimmy

Model lt1000 craftsman riding mower [ 2 Answers ]

I have a craftsman lt1000 riding mower, I have no belt diagram, and belt is loose blades want turn, Does anybody know how to adjust belt, My grass is getting high thanks


View more questions Search