Ask Experts Questions for FREE Help !
Ask
    louismobley's Avatar
    louismobley Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 8, 2011, 09:07 PM
    The load to be includedfor an outlet for general-purpose convienience receptacles is
    What is the V.A.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Jun 9, 2011, 02:37 AM
    Volt-amps, AKA watts, more correctly AC watts.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #3

    Jun 9, 2011, 03:06 AM
    Quote Originally Posted by louismobley View Post
    the load to be includedfor an outlet for general-purpose convienience receptacles is
    What is the V.A.?
    What test is this for?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

15 amp outlet on 20 amp circuit and load [ 7 Answers ]

Hi, I have a 20A circuit that currently has 15A outlets on it. Currently, only my fridge (11.5A) and another outlet is on this circuit. Q1: If I connect 15A outlets in a series with 12/2, does that effectively lower the rating of the rest circuit to 15A? Can I wire in this as this example...

General lighting load [ 3 Answers ]

I am an electrician, renovating an office/warehouse. There are 2 area measurements on the drawings. 1 is 'area of renovation' 9650 RSF. The other is 'office/support area calaulation' 4100 USF. Which do I use to calculate general lighting load?

I installed a GFCI in the upstairs bathroom, outlet works fine and the 'load' portion [ 2 Answers ]

I installed a GFCI in the upstairs bathroom, outlet works fine and the 'load' portion powers all the other light circuits okay with one exception. The GFCI pops every time I turn on the hallway lights (3-way switch). However, same wall box shares stair light circuit, also with 3-way switch and it...

The reversing entry in the general journal and posting it to the general ledger [ 4 Answers ]

Hi I need to know How I can post reversing etry in to the general ledger ? For example if I have The business last paid a water bill in May, which was for 3 months of water expense up to the end of April. The additional accrual entry for water expense for the last two months is $2,290. And I...

Computation of load for convenience outlet [ 1 Answers ]

I just want to be sure in my computation. The national electrical code provides that, "for each single receptacle shall be considered at no less than 180 watts rating". For me its mean that each convenience outlet is considered to have a maximum load of not less than 180 watts per plug or gang. ...

View more questions Search