I have a 1994 Tempstar 5000 CA5536UKA1

tlbottomjr Posts: 2, Reputation: 1

New Member

Jun 5, 2011, 07:59 PM

I have a 1994 Tempstar 5000 CA5536UKA1

The relay has a black button it I push it will turn the fan. But, now the black reset will not stay in. When I push it in it works. Do I just need a new relay or whatever that unit is?

Check out some similar questions!

I have a Tempstar 5000 heatpump. [ 2 Answers ]

My heatpump started freezing up last month and I noticed that the fan was hard starting. I replaced the capacitor so the fan would start up, but it still has freeze ups. What could be my problem?

How many ton is my tempstar 5000 model ch5530vkd1 [ 1 Answers ]

How many ton is my tempstar 5000 model ch5530vkd1 I am getting ready to add on an additional 300 sq ft and want to know if it can handle the load. Tks

Tempstar furnace 5000 [ 4 Answers ]

I am looking for a red tube very flexible and high heat resistant which is not available anywhere in my New York (rockland county) area. This tube allows the regulation of the thermostat efficiency.

Tempstar 5000 [ 1 Answers ]

I have a Tempstar 5000 A/C unit and would like to know the condenser size It's model # is ca5536uka1 so should I assume it is a 3 ton unit? Thanks Erik

Tempstar 5000 [ 3 Answers ]

I have changed the coil because it looks like it had a spark or got hot because there was black soot on the power terminals so I replaced it but it still doesn't work. When you turn it on there is a small hum the magnets are not being pulled in, when you push them in humming gets louder from the...

View more questions Search

Check out some similar questions!

Add your answer here.