Ask Experts Questions for FREE Help !
Ask
    rose1to1's Avatar
    rose1to1 Posts: 1, Reputation: 1
    New Member
     
    #1

    May 30, 2011, 06:57 AM
    Torro 6.5 gts gas line
    Torro 6.5 gts lawn mower has a leak in gas line, where can I purchase a new gas line
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
     
    #2

    May 30, 2011, 07:19 AM

    Any small engine shop should have it.
    Luck

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Flex Connector for gas range is too big for the gas supply line [ 3 Answers ]

Got a new gas range. The old range had a yellow gas flex connector and fit perfectly on the brass flare end of the supply pipe, but the new steel connector is too big for the flare end fitting of the gas supply pipe, although just right for connecting to the range. The house was built in 1957, and...

The gas line broke on a Ryobi 725r and I need to know the diameter of the line. [ 1 Answers ]

The gas line broke on a Ryobi 725r and I need to know the diameter of the line.

Flexi vs. Black iron gas line to water heater gas valve [ 3 Answers ]

I have seen gas water heater " install kits" that use the yellow flex appliance line for the gas connection to the gas valve on the water heater. My tank was installed when the house was built and has black iron pipe all the way to the union and into the valve on the tank. I have heard some codes...

Torro riding mower [ 1 Answers ]

I have a new torro zero turn mower. ive had it in the shop 3 times now and no one can find the problem. You can be cutting with it and it will just shut off. No spitting or spurttering, it just shuts off and will not restart. I have had the gas line, gas filter,air filter oil and filter changed,...

Connection to gas range gas line too large for gas line intake valve [ 2 Answers ]

Connection to gas range gas line too large for gas line intake valve. How can I step the range back line down a step. Is there some kind of converter I can buy?


View more questions Search