Ask Experts Questions for FREE Help !
Ask
    Hamza_Hussien's Avatar
    Hamza_Hussien Posts: 1, Reputation: 1
    New Member
     
    #1

    May 26, 2011, 10:22 PM
    Tuning fail solution om HUMAX IR-ACE II?
    When I always have a manual search and setup the settings and press OK it says:Service Search Failed
    Please tell me how to fix this problem






    Thank You







Check out some similar questions!

Humax receiver unable to tune spacetoon English [ 10 Answers ]

Last week my TV was at fault finally after fixing it I found all the channels on my humax receiver model IR Ace II were mixed up . Some how I have tuned the receiver and got most of the channels . However some of the channels are not coming It says tuning failure if I put that frequency . Like...

Am I An Ace in the hole? [ 1 Answers ]

How about a mother who can't pay her bills, Lives in a 2 bedroom apt that is Trashed all the time with 2 sets of twins 5 and todlers. She clams she is exosted all the time and that is why the house never gets cleaned up . Dishes pile up garbage on the floor ,home packed wall to wall with junk,...

Solution humax tuning failure problem [ 0 Answers ]

Last week my TV was at fault finally after fixing it I found all the channels on my humax receiver model IR Ace II were mixed up . Some how I have tuned the receiver and got most of the channels . However some of the channels are not coming It says tuning failure if I put the followinf...

Super ace II [ 1 Answers ]

Can anyone help me to find a super ace II sewing machine manual?

To Wire an Ace TX 500 [ 5 Answers ]

I have switched from an old A/C, Heating Thermostat to a TX 500 Thermostat. Thing is I have black, blue (which I know is the "C" wire), red, yellow and white. How do I hook this up so both the A/C and Heat work when I need it to?


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.