Ask Experts Questions for FREE Help !
Ask
    hrols64's Avatar
    hrols64 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 26, 2011, 07:16 PM
    Dlt 3000
    Just bought a used one for the lake and in a bind or uphill it jerks will this be belt or transmission thanks
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    May 26, 2011, 07:58 PM

    Sounds like a slipping belt, do you get any unusual sounds like a squeel
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #3

    May 26, 2011, 08:01 PM

    I would check the belt . This usually causes a jerk , the tranny is more of a slip.
    Luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dlt 3000 craftsman blades [ 6 Answers ]

Why am I having to twist my motor around by hand, off a compression stroke, before it will start?

DLT 3000 Lawn Tractor Smokes [ 2 Answers ]

My 5 year old DLT Lawn Tractor smokes after a few seconds of warming up. I should say heavy smoke. Other wise it runs well, starts up well and responds to all levels of the choke. Oil has been changed new plug etc... My son added oil but the oil dip stick reads correctly. My neighbor said...

Blades Not Engaging- Craftsman DLT 3000 [ 1 Answers ]

My Craftsman DLT 3000 is running fine, but I am unable to get the blades to engage. When I raise the lever to get the blades to engage, it is stiff, and I get no movement from the blades. Looking at the little steel cable that the lever is connected to there's not great tension on the cable. When I...

Craftman DLT 3000 [ 1 Answers ]

Push in the brake to start it will start but when you let the brake off it stalls out

View more questions Search