6 wire desk fan diagrahm

Check out some similar questions!

Replacing a Rheem 5 wire condenser fan motor with an Emerson 4 wire condenser Fan [ 0 Answers ]

I have a Rheem a/c unit that the fan motor quit. I took all the information off the old motor and went to a local supply store and they cross-referenced the numbers and gave me and Emerson motor. All the specs are the same, 1/5 HP, 1075 RPM, 60 Hz, 1.3 Amp, single phase. When I got home, I took...

Replace 4 wire ceiling fan (& wall plate 2 wall sliders), with 5 wire fan + remote? [ 6 Answers ]

Hi all, Current configuration: Wall switch that has 2 sliders, one for the fan (has multiple speed capability) and the other for the light (has dimming capability). Our wall slider switch looks like this one (but not this make/model), just for FYI: Hunter Fan/Light Dual Slide Preset Control -...

3-wire capacitor to work like a 2-wire in a fan ceiling combo with new dimmer [ 21 Answers ]

I have bought a FAN/LIGHT dimmer switch in lieu of the regular switch with the pull chains on my fan/light combo. I haven't even started with the switch portion where I have red wires and one thick black one. I am still working on the damn pull chain to NON pull chain setup now. I have this same...

How to wire 2 wire fan remote to 3 wire circuit? [ 10 Answers ]

I have a room that has 2 light switchs to the same light, so it is a 3 wire circuit. I bought a fan with a remote and the wall mounted remote has only 2 wires, how can I connect it? Thanks, Pete

3-wire home, 3-wire fan, 2-wire remote [ 9 Answers ]

Greetings, My home is 3-wire. I bought a Hunter ceiling fan (model 23811). The fan came with a remote assy. That I do NOT want to use... The fan has standard 3-wire connections (black, white, blk&white strip, ground). The remote receiver home-side wiring looks to be for 2-wire (blk and white)....

View more questions Search

Check out some similar questions!

Add your answer here.