 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Little to no water when bathtub faucet is turned on
I have this problem about every three to four months and maintenance comes to fix it. But I am tired of calling them and waiting when it takes them 10 minutes to fix my problem.
Basically over time, I lose pressure in my water faucet/shower head and eventually to where hot water only trickles out. I have a single control for hot/cold water. I have attempted to open it up. When I take off the cap, there is a white plastic piece that turns on and off the water. I noticed that if you press it down, water gushes out so I am assuming I need to make an adjustment. Inside there are two screws: One at about 7 o'clock and one at about 2 o'clock. Hopefully this is enough information to help me out. |
||||
Check out some similar questions!
During the night of January 24, our water pipes froze. To make a long story short, the city came by, did something and seemed to have fixed our issue. But we later realized that we have no water coming out of the upstairs bathtub hot water faucet. When we turn on the water, there is maybe a tiny...
Only hot water coming through bathtub faucet, even when turned to cold, hot water only comes through and on top of that the water runs very slowly.
Fixed pipe leak on hot water heater. Opened faucets in house during repair. When done one faucet in bedroom bath doesn't have any water coming out.
Hello. We have a fauced that when turned normally does not have any water flowing out. There is a bang when this is done too. If the faucet is turned slowly, water will come out. Thanks!
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
