 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Call down to a rheem supply house give them the model number and ask if they had any warranty issues with the circuit board it might be the board sometimes they fail leaving the blower on letting you know there is a problem alsp see if it is pulling any codes hope it helps
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a thirty yr old rheem electric furnace. The only way to shut off heating cycle is to shut off breaker, appears a new heat cool tstat has been installed, I have two wires from furnace connected to "rh and w" on tstat.
My Rheem gas furnace turns on with no problem but will not shut down when the required temperature is reached any ideas?
Rheem Criterion RGDG-100AUER ignition flame is on ( there is a flame), in fan is not moving, the burners do not ignite. House was built 1993. I can't find a manual online. We are freezing! Can someone help please?!
The motor furnace won't turn on , it try to go on for a few min but won't go on , but if I hit it a couple of time it turn on for 40 secondsand it will go off... burn smell comes out.. and finally everythin shutsdown. The blower motor won't turn on either.
Where is the flame sensor on this rheem model?
View more questions Search
|
