Ask Experts Questions for FREE Help !
Ask
    bazar1212's Avatar
    bazar1212 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 17, 2011, 01:18 PM
    5.5hp 2.5 kva honda generator
    Please can you tell me why I do not have no output on 240v and 110v engine running o.k the neadle is only just moving on the gauge the switch is o.k:confused:
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    May 18, 2011, 05:55 AM

    If its been sitting , it could need to be flashed.
    With it running , you might plug a drill in put it in reverse and turn by hand , but be ready to let go in case it decides to work. Luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honda EU2000i generator [ 0 Answers ]

I have 2 eu2000i honda generators that I run parallel with a gen-tech parallel kit. They have worked fine for over 4 yrs running everything at once in my toyhauler. I had them serviced about 3 mo. Ago because 1 of them was running real rough. They cleaned the carbs. In both gen. & they run fine...

How many 3 hp airconditioiner can a 45 kva generator carry [ 1 Answers ]

Can my 45 kva generator carry a server hosting 200 desktop computers, ten 150 watts bulbs, and a 5 hp air conditioner? *** assist with breakdown of the calculation.

View more questions Search