Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
What source of light ( Laser/LED) should I use for this experiment.
[ 0 Answers ]
First of all I would like to say this is not homework mmkay. In my experiment I will be making tollens mirrors using various variables in order to find out what the minimum of each is needed to produce a "full" mirrored covering. To test the mirroredicity of the mirrors I will , first...
Source an 18 point broach valve handle
[ 0 Answers ]
One power source to fan need dimmer for light only
[ 2 Answers ]
I have one switch to my fan junction box. Does anyone know of a remote that I can install in the junction box that will allow me to dim the light? I found one that will allow me to turn the light on/off (by Hampton Bay) and control the fan speed, but I need to control the light brightness.
Light source
[ 3 Answers ]
7. The tip of the stem of an oat leaf plant is covered with aluminium foil. A light source from one side will A. cause the stem to bend toward the light source B. cause the stem to bend away from the light source C. cause the stem to wither an die D. have no effect on the stem I say...
Wiring 120V light from 240V source
[ 6 Answers ]
I currently have a well house that has a 240V source on 12-2 wire powering a submersible well pump. I would like to wire in a 120V light. Can this be done using the 12-2 wire already in place or do I need to remove the 12-2 wire and install 12-3 wire? (It is approximately 60ft from the main house... View more questions Search
|