Ask Experts Questions for FREE Help !
Ask
    SSLEVITT's Avatar
    SSLEVITT Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 25, 2007, 03:56 PM
    Capping Off Bathtub Drain/faucet/etc
    I Have Removed My Bathtub And Would Like To Tile The Floor, How Do I Seal/close/remove Drain? How Do I Remove Pipes That Are Sticking Out Of Wall And Seal Them? Thanks, Stuart
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Jan 26, 2007, 09:00 AM
    You use hard caps to seal the trap raiser and the supply lines. You will have to open up the wall, cut the supplies back and cap them inside the wall line. Then patch the wall. Good luck, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dripping bathtub faucet [ 2 Answers ]

I have a Delta faucet with a single knob, it is dripping from the faucet in the shower. How can I fix it.? Thanks, Alice

Moen Bathtub faucet [ 3 Answers ]

My single knob Moen bathtub/shower faucet is 6 years old (new house) and recently, when turned to hot, it shuts off. The only water that comes out is cold. The tub/shower are infrequently used. Any ideas?::confused: Thanks for any tips.

Leaky Bathtub Faucet [ 1 Answers ]

I have an old Stanadyne (I've been told this is now Moen) bathtub faucet that leaks out of the spout when it is turned off. I'm not sure how to describe the faucet other than it is a single-handle that I pull away from the wall and then turn right or left to adjust the water temperature. It looks...

Bathtub Faucet dripping [ 1 Answers ]

I have a full bath on the 2 and floor, which has a single knob Delta faucet with a shower head.My problem is that the faucet is dripping continuously with a steady stream.How can I repair it? Thank You. Shashi.

Bathtub faucet, valve, drain alignments [ 2 Answers ]

Hello Yesterday I had a plumber install a new bathtub and rough in the plumbing. The problem is that the drain does not align with the faucet, valve or shower head. Could they just notch out the 2x4 and move the valve further to the right to align the fixtures? I paid them $1300 and it just does...

View more questions Search