Ask Experts Questions for FREE Help !
Ask
    KOZYSKIES's Avatar
    KOZYSKIES Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 16, 2004, 05:56 PM
    Power washer
    My power washer is gas powered and it runs until i pull the trigger it cuts right off there seems to be a problem with pressure not building up what's wrong with it if i start it up it will keep running till i start washing , sometimes no water comes out or in spurts
    Henry Bockman's Avatar
    Henry Bockman Posts: 7, Reputation: 1
    New Member
    		  
    #2

    Oct 19, 2005, 07:45 PM
    You need to replace your unloader. This is the part that regulates the pressure coming out of your pump. Either contact the manufacturer or Sun Brite Supply, they can help you find a replacement.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Husky Power Washer [ 2 Answers ]

How do you remove a broken wand that is inside the spray nozzle?

Husky Power Washer [ 1 Answers ]

Newly purchased replacement sprayer wand will not insert far enough to allow a twist and lock into place.

No AC Power [ 3 Answers ]

Hi, The AC in one my rentals would not come on so I checked all the wiring to see if something was loose, it wasn't. I crossed several combinations and when I plugged the blue wire to the Y terminal the system shut off completely. I bought a new heat pump thermostat but once plugged in, it...

View more questions Search